DuraStripe
DuraStripe T-Tips
Professional aerosol field marking paint
Professional aerosol field marking paint with T-tip spray control for athletic field layouts and routine striping.
- T-tip spray system lays down a clean stripe up to 4 inches wide and can be rotated for thin detail lines.
- Designed for football, soccer, baseball, lacrosse and field hockey field marking.
- Works for hand-held marking or with compatible USSC aerosol field marking machines.
Available Colors
Overview
DuraStripe T-Tips is a professional aerosol athletic field marking paint built around the T-tip application system.
Use it for field striping, layout work, detail marking and touch-ups on natural grass or synthetic turf when a portable aerosol workflow fits the job.
Key Benefits
- T-tip spray system lays down a clean stripe up to 4 inches wide and can be rotated for thin detail lines.
- Designed for football, soccer, baseball, lacrosse and field hockey field marking.
- Works for hand-held marking or with compatible USSC aerosol field marking machines.
Product Specifications
| Packaging | Standard aerosol can: 20 oz volume / 18 oz net weight. 12 aerosol cans per case. For larger-capacity aerosol work, see DuraStripe Fat Can. |
|---|---|
| Coverage | Restripe coverage is approximately 110 linear yards / 330 ft per standard 20 oz can at a 4-inch line width. Coverage varies with first-time painting, operator technique, paint pressure and surface texture. |
| Dry Time | Maximum 30 minutes at 77 F / 50% RH. |
| Cleanup | Clean with soap and water before the coating dries, or paint thinner after drying. |
Best For / Applications
Athletic field layouts, lines, numbers, logos and maintenance marking.
Schools, universities, municipalities, parks departments and sports-field contractors.
Application Surfaces
Natural grass, synthetic field turf, asphalt and concrete where product guidance applies.
Application Information
Apply to dry, clean surfaces. For natural turf, mow and clean the field before striping; for synthetic surfaces, sweep or blow off debris.
Maintain air and surface temperatures between 50 F and 90 F during application and drying.
Hold vertically for a wide stripe, or rotate the can 90 degrees for a thin detail line.
Resources & Tools
Need Help Choosing?
Our product specialists are ready to help you find the right solution.
1-800-2-STRIPE