Plastech
PLASTECH-SB
Professional USSC product
Solvent-based Plastech traffic paint for supported traffic marking applications.
- Solvent-based Plastech formulation for line and zone marking.
- Fast-dry, high-build formula that can be applied at heavier wet film builds where the TDS guidance applies.
- Can be used with glass beads where the project requires reflective markings.
Overview
PLASTECH-SB is a solvent-based Plastech traffic line and zone marking paint.
Use it for supported road, runway, parking, warehouse, safety-zone and crosswalk applications where a solvent-based Plastech system is appropriate.
Key Benefits
- Solvent-based Plastech formulation for line and zone marking.
- Fast-dry, high-build formula that can be applied at heavier wet film builds where the TDS guidance applies.
- Can be used with glass beads where the project requires reflective markings.
Product Specifications
| Coverage | Coverage is 320 linear feet of 4-inch-wide line at 15 mils thickness. |
|---|---|
| Dry Time | Dry-to-touch time is 15 minutes maximum at 77 F / 50% RH; dry-through time is 60 minutes at 30 mils wet. |
| Cleanup | Clean up with paint thinner, toluene or MEK. |
Best For / Applications
Parking lots, roads, runways, airports, warehouses, safety zones and crosswalks.
Application Surfaces
Asphalt
Concrete
Asphalt and concrete when the surface is dry, clean, properly cured and prepared.
Application Conditions
Apply when substrate temperature is above 50 F and humidity is below 80%. New asphalt and concrete must be aged at least 30 days and properly cured before application.
Resources & Tools
Safety Data Sheet (SDS)Technical document
Technical Data Sheet (TDS)Technical document
Technical AssistanceNeed help matching a Traffic Paint product to a project specification, surface or application? Contact a USSC product specialist for technical assistance.
Need Help Choosing?
Our product specialists are ready to help you find the right solution.
1-800-2-STRIPE